Great Price for

B3-32 60 Plate 1" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Best

Rate This Product :

B3-32 60 Plate 1" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 11.25" x 4.56"
• 1.92 m² Total Surface Area
• Design Pressure: 3.0 Mpa (435 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-32 60 Plate 1" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 11.25"" W: 4.56""Heat Transfer Area/Plate 0.032 m?/plate (.24 ft?/plate)Thickness of plates 0.4 mm (.015"")Max Flowrate 125 L/min (33 gpm)Channel Capacities 0.05L/channelDesign pressure 3.0 Mpa (435 psi)Test Pressure 4.5 Mpa (650 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 5-25KW (17,000-85,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 31, 2011 21:21:54

Check Out B3-32 20 Plate 1" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger

B3-32 20 Plate 1" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Best

Rate This Product :

B3-32 20 Plate 1" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 11.25" x 4.56"
• 0.64 m² Total Surface Area
• Design Pressure: 3.0 Mpa (435 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-32 20 Plate 1" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 11.25"" W: 4.56""Heat Transfer Area/Plate 0.032 m?/plate (.24 ft?/plate)Thickness of plates 0.4 mm (.015"")Max Flowrate 125 L/min (33 gpm)Channel Capacities 0.05L/channelDesign pressure 3.0 Mpa (435 psi)Test Pressure 4.5 Mpa (650 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 5-25KW (17,000-85,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 30, 2011 20:02:44

Great Price for

B3-23 30 Plate 3/4" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Best

Rate This Product :

B3-23 30 Plate 3/4" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 12" x 2.9"
• 0.69 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-23 30 Plate 3/4" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 12.4"" W: 2.9""Heat Transfer Area/Plate 0.023 m²/plate (.247 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.04L/channel (.0105gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 3-10KW (10,000-34,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 29, 2011 19:51:09

Huggacast 83: Brazing Steel

Huggacast 83: Brazing Steel Video Clips. Duration : 1.15 Mins.

Davidson's Will Meyers brazes lugged steel

Tags: bikehugger, huggacast, lugged, steel

Beer aluminium bank welding

Beer aluminium bank welding Tube. Duration : 0.97 Mins.

MULTIPLAZ-2500M is a multi-functional, portable, handheld water-plasma device easily cuts any known non-combustible material, (unlike gas-welding), including stainless and high-alloy steel, aluminum, titanium, brick, concrete and ceramic. The quality is inherent and comparable with that of a laser device. The MULTIPLAZ-2500M water-plasma set is a universal tool for metallic and non-metallic materials treatment. Neither compressors, nor pressurized cylinders, are required for its application. The only thing needed is a single-phase 220V socket connector and some tap water or aqueous-alcoholic mixture, filled directly into the torch. The suggested new plasma device differs from conventional equipment by its portability, it being ecologically sound and environmentally compatible and it being multifunctional. Cutting is performed by oblique and forward arcs; welding - by plasma and plasma-arc methods; soldering - by brazing alloy and common solder.

Keywords: Welding, Arc, Water, plasma, device, multiplaz, electronics, mechanics, medicine, aviation, space

Check Out B3-12 20 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger

B3-12 20 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Best

Rate This Product :

B3-12 20 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 7.5" x 2.9"
• 0.24 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-12 20 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 7.5"" W: 2.9""Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.018L/channel (.004756 gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 26, 2011 12:08:21

Rex Heat Treat - Company Overview

Rex Heat Treat - Company Overview Video Clips. Duration : 3.10 Mins.

Rex Heat Treat is a family owned and operated business that was founded in 1938 by J. Walter Rex. For three generations we have taken pride in our ability to partner with our customers to gain insight regarding their future needs. Rex Heat Treat has more capabilities, under one roof, than any other heat treater on the East Coast and is well regarded as a leader in the heat treat industry. Rex Heat Treat also has the distinction of being the only heat treater to have received the "National Small Business Subcontractor of the Year" Award.

Keywords: Rex Heat Treat, Rex, Heat Treat, Heat Treating, Metal, Aging, Annealing, Austemper, Austenite, Brazing, Carbonitriding, Carburizing, Cold Straightening, Cyrogenic Heat Treatment, Ferritic Nitro Carburizing, Fixture Straightening, Harden and Temper, Induction Heat Treatment, Marquenching, Nitriding, Non Ferrous Treatments, Aluminum, Bronze, Copper, Stainless Steel, Stress Relieving, Tempering, Titanium, Tool Steels, Vacuum Heat Treat, Cast Expo, Iron, Smelt, Heat, Treat

Check Out B3-23 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger

B3-23 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Quality Best

Rate This Product :

B3-23 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 12" x 2.9"
• 0.69 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-23 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 12.4"" W: 2.9""Heat Transfer Area/Plate 0.023 m²/plate (.247 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.04L/channel (.0105gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 3-10KW (10,000-34,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 24, 2011 11:28:49

part 2 of stainless porteur rack build.

part 2 of stainless porteur rack build. Video Clips. Duration : 3.32 Mins.

Tags: frame building, frame, cycle, bicycle, building, brazing, braze, stainless, steel, machining, porteur, rack, front, barrett, russell, The, Barrettrussell

TERMOMACCHINE_TWIN_CENTERLESS_SHAFT_HARDENING

TERMOMACCHINE_TWIN_CENTERLESS_SHAFT_HARDENING Video Clips. Duration : 0.53 Mins.

TERMOMACCHINE TWIN CENTERLESS MACHINE FOR THE INDUCTION HARDENING OF SHAFT IN THE DIAMETER RANGE 6 TO 25 MM.Hardening of vertical output shafts. Horizontal hardening of drive bars. Hardening of shock-absorber stems. Hardening of axle shafts. Hardening of constant-velocity joints. Hardening of power take-off. Hardening of cardan shafts. Hardening of bolt heads. Heating of titanium and/or stainless steel wires and subsequent warm heading on multistage header. Brazing of hard metal tools. Brazing of resistances. Brazing of gauges. On-line tempering of mechanical parts. Shrink-fitting. Hardening and tempering of chains. Section hardening of tools for agriculture. Heat treatment of components for earth-moving machines. Special custom-made machines for heat treatment and tempering.

Tags: CENTERLESS, INDUCTION, HARDENING, SHAFT, Mazzola, Termomacchine

Great Price for

B3-12A 40 Plate Heat Exchanger 1/2" Female NPT Copper Brazed Stainless Steel Quality Best

Rate This Product :

B3-12A 40 Plate Heat Exchanger 1/2" Female NPT Copper Brazed Stainless Steel Feature

• 0.48m^2 Surface Area
• L: 7.5" W: 2.9" H:3.52"
• -195°C to +220°C (-319°F to 430°F)
• 1.0 Mpa (145 psi)
• UL Listed Stainless Steel 304

B3-12A 40 Plate Heat Exchanger 1/2" Female NPT Copper Brazed Stainless Steel Overview

"Dimensions L: 7.5"" W: 2.9""Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.018L/channel (.004756 gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 21, 2011 03:54:45

Check Out B3-12 30 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger

B3-12 30 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Quality Best

Rate This Product :

B3-12 30 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 7.5" x 2.9"
• 0.36 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-12 30 Plate 1/2" Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 7.5"" W: 2.9""Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.018L/channel (.004756 gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 20, 2011 01:01:05

Brazing Stainless Steel

Brazing Stainless Steel Video Clips. Duration : 1.90 Mins.

Brazing stainless steel tubing to an NPT pipe plug using silver braze. See also our stainless welding video - www.youtube.com

Tags: brazing, stainless steel, solder, silver, torch, dmholden, 1410

Check Out B3-12 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger

B3-12 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Quality Best

Rate This Product :

B3-12 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 7.5" x 2.9"
• 0.36 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-12 30 Plate 3/4" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 7.5"" W: 2.9""Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.018L/channel (.004756 gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 18, 2011 00:40:41

Check Out B3-12 30 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger

B3-12 30 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Quality Best

Rate This Product :

B3-12 30 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 7.5" x 2.9"
• 0.36 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-12 30 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 7.5"" W: 2.9""Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.018L/channel (.004756 gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 16, 2011 18:15:27

Great Price for

B3-12 20 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Quality Best

Rate This Product :

B3-12 20 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Feature

• 7.5" x 2.9"
• 0.24 m² Total Surface Area
• Design Pressure: 1.0 Mpa (145 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

B3-12 20 Plate 1/2" Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger Overview

"Dimensions L: 7.5"" W: 2.9""Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)Thickness of plates 0.3 mm (.0118"")Max Flow Rate 66.6 L/min (17.6 gpm)Channel Capacities 0.018L/channel (.004756 gal/channel)Design pressure 1.0 Mpa (145 psi)Test Pressure 2.0 Mpa (290 psi)Design Temperature -195°C to +220°C (-319°F to 430°F)Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)Flow direction F1-F3 and F2-F4 (see diag above)Welding Material 99.9% CopperCorrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.Manufacture Material Stainless Steel 304Applications SVO conversions, Heat pump system, household type central air conditioning, after heat recycling, refrigeration equipment, industry cold water machine,cooleroil and so onUL Listed Yes - TUVReinland ISO9001:2000"

Customer Reviews

*** Product Information and Prices Stored: Dec 16, 2011 18:14:28