Great Price Brazetek for

20-plate Brazed Heat Exchanger - 3/4" MNPT ports Best

Rate This Product :

20-plate Brazed Heat Exchanger - 3/4" MNPT ports Feature

• Popular for Solar Heating applications
• Beer & Wort Chilling
• SVO / WVO oil preheating for cars / trucks / boats
• For help with sizing visit: http://www.brazetek.com

20-plate Brazed Heat Exchanger - 3/4" MNPT ports Overview

Compact Brazed Plate Heat Exchanger - great for Solar heating, SVO / WVO oil-preheating applications for trucks, cars and boats, Beer and Wort Chilling, and many other heating and cooling applications. Unit Dimensions: 3"x8" - 20 plates - 316L Stainless Steel - Copper Brazed - 3/4" MNPT Ports - Flow Rate: 15 GPM max - Design pressure 435 psi

Customer Reviews

*** Product Information and Prices Stored: Feb 28, 2012 05:23:23

Check Out 16-plate Brazed Heat Exchanger - 3/4" MNPT ports

16-plate Brazed Heat Exchanger - 3/4" MNPT ports Best

Rate This Product :

16-plate Brazed Heat Exchanger - 3/4" MNPT ports Feature

• Popular for Solar Heating applications
• Beer & Wort Chilling
• SVO / WVO oil preheating for cars / trucks / boats
• For help with sizing visit: http://www.brazetek.com

16-plate Brazed Heat Exchanger - 3/4" MNPT ports Overview

Compact Brazed Plate Heat Exchanger - great for Solar heating, SVO / WVO oil-preheating applications for trucks, cars and boats, Beer and Wort Chilling, and many other heating and cooling applications. Unit Dimensions: 3"x8" - 16 plates - 316L Stainless Steel - Copper Brazed - 3/4" MNPT Ports - Flow Rate: 15 GPM max - Design pressure 435 psi

Customer Reviews

*** Product Information and Prices Stored: Feb 25, 2012 21:26:51

Tig Welding Stainless Steel wire to form ball end

Tig Welding Stainless Steel wire to form ball end Tube. Duration : 3.57 Mins.

Shows Tig welding ends of stainless steel braided wire loop to form a ball end on loop. This is for my Pistol Pal™, 4in1 Takedown tool, for the Ruger MKI-II-III .22 pistols. The welded ball binds the wire ends together and prevents it being pulled out when crimped into the tool head. Welding is being done at 3amps with a miller Dynasty 200 Inverter machine. I'm also trying out a borrowed Speedglas, auto -darkening welding helmet for the first time. It's a pretty nice helmet!

Tags: Tig, Tig Welding, welding stainless steel, welding, Ruger, pistol, .22 rimfire, Gunsmither Tools, gunsmith tool, gunsmith, Ruger Mark 1, Ruger Mark 2, Ruger mark 3, Ruger .22/45 pistol, Miller Dynasty 200, Miller welder, Speedglas welding helmet, welding jig, welding fixture, gun

Great Price Campbell Hausfeld for

3/32" Oxy-Acetylene Brazing Rods Best

Rate This Product :

3/32" Oxy-Acetylene Brazing Rods Overview

WE1200 For use on steel, copper alloys, cast iron nickel alloys and stainless steel, this 3 Pack of 3/32'' Brazing Electrodes are great for general purposes. You should use a neutral or slightly oxidizing flame to produce high strength, ductile weld deposits. 3/32'' Oxy-Acetylene Brazing Rod, 3 pieces, flux coated, low fuming bronze. Features: - General purpose use - Use for steel, copper alloys, cast iron nickel alloys and stainless steel - Use a neutral or slightly oxidizing flame to produce high strength, ductile weld deposits - 3/32'' Oxy - acetylene brazing rod - Flux coated, low fuming bronze Specifications: - Weight: 0.21 lbs. - Warranty: 1 year limited - Dimensions: 15.5'' H x 1'' W x 1'' D

Customer Reviews

*** Product Information and Prices Stored: Feb 23, 2012 10:13:19

Dimpling and soldering a 1/2" NPT coupler in a stainless homebrew kettle / pot

Dimpling and soldering a 1/2" NPT coupler in a stainless homebrew kettle / pot Tube. Duration : 13.33 Mins.

This is how I put fittings in my homebrew kettles, HLT and MLT. It's easier than welding, cheap to get started (cost me less than in flux and solder from Ebay) and really works a treat. Anyone can do this. If you don't have a MAPP tank, a regular propane tank will work as well. Flux is Harris Stay-Clean. Solder is Harris Stay-Brite 4% silver-bearing. Parts list for the dimpling tool - note the tapered adapter may need to be opened slightly to fit over the 5/8" bolt (just a few thousandths of an inch). If you don't have a Dremel or other tool to do this, you may want a 9/16" bolt instead: 5/8"-11 x 4 1/2" bolt 5/8" washer 3/4" to 1/2" stainless steel butt-weld pipe fitting (McMaster-Carr p/n 45605K711) 1" stainless socket weld low pressure coupling (McMaster-Carr p/n 4335T64) 1/2" washer (drilled to 5/8" with the step bit) 5/8" washer 5/8"-11 nut Close-up photo of the dimpling tool: i19.photobucket.com Visit us on the web at www.manskirtbrewing.com

Keywords: solder, homebrew, beer, keg, flux, stainless, steel, weldless, fitting, nipple, npt, mapp, torch

Rad + Outdoor Bremen 2011

Rad + Outdoor Bremen 2011 Video Clips. Duration : 3.17 Mins.

Fahrradmesse in Bremen.

Keywords: SIMONCINI, Frames, Stainless, Steel, fillet, brazing

Braze Solutions Fuel Line Induction Brazing Machine

Braze Solutions Fuel Line Induction Brazing Machine Tube. Duration : 1.63 Mins.

www.brazesolutions.com - Brazes the ball end of an automotive stainless steel fuel line in an inert atmosphere.

Tags: braze, brazing, induction, inert, atmosphere, automotive, fuel, line

brazing with gas modification.wmv

brazing with gas modification.wmv Tube. Duration : 9.37 Mins.

Keywords: hho, brazing, gas, flame, stainless steel

TIG Welding Stainless Steel

TIG Welding Stainless Steel Video Clips. Duration : 1.77 Mins.

TIG welding of a tiny stainless electrical connector to a piece of thin walled tubing. See also our brazing video - www.youtube.com

Keywords: TIG, weld, welding, stainless steel, tubing, instruction, crafts

T-Drill SEC-100

T-Drill SEC-100 Tube. Duration : 5.03 Mins.

WWW.T-DRILL.US SEC-100 Automatic Collaring Machine Collaring range OD: 21.3 - 114.3 mm (1/2" - 4") Max run tube OD 219.1 mm (1" - 8") Wall thickness up to 4.0 mm Collaring time 5 - 10 minutes

Tags: collar, collaring, branch, branching, outlet, tee, fitting, industrial, automated, automatic, braze, joint, stainless, steel, t-drill

T-Drill Plus-100

T-Drill Plus-100 Video Clips. Duration : 2.80 Mins.

WWW.T-DRILL.US The PLUS 100 is a profit producing attachment for the T-60. The PLUS 100 forms 2" to 4" outlets on K, L or M copper tube from 2 1/2" to 8". It will also create those hard to find tees such as 2½" X 2 ½", 4" X 3" or 4" X 4". Some contractors have even turned the PLUS 100 into a profit center between projects. They are forming outlets and braze in branch tubes - cutting and grooving tube to sell to wholesalers or even their competition!

Keywords: pipe, tube, forming, portable, collar, collaring, branch, branching, outlet, tee, fitting, commercial, copper, cpvc

Cobra DHC 2000 Torch - Stainless Steel Welding Video - TorchWeld.com

Cobra DHC 2000 Torch - Stainless Steel Welding Video - TorchWeld.com Tube. Duration : 3.22 Mins.

Learn how to weld Stainless Steel using the Cobra DHC 2000 welding torch. Formerly known as the Henrob 2000. See our other videos for welding and cutting other metals as well. Visit TorchWeld.com for more info.

Keywords: steel, automobiles, repair, metal, how, to, weld, cut, stainless, dhc, 2000, torchweld, henrob, cobra, plasma